|
| Batteriegriff von Siolex für meine Mark II - Erfahrungen | |
Forenlevel: Hobbyfotograf
|
Anmeldungsdatum: 17.08.2010 |
Beiträge: 2 |
|
|
Verfasst am: 22 Okt 2010 15:38 |
|
Hallo zusammen,
heute wage ich mich an meinen ersten Beitrag.
Ich hoffe ich versemmel ihn nicht direkt im falschen Forum.
Zu meiner Frage:
Für meine Mark II bin ich auf der Suche nach einem Batteriegriff.
Der BG-E6 von Canon bietet für mein Empfinden aber verglichen zur Konkurrenz relativ wenig für viel Geld.
jetzt bin ich über diesen hier:
Link
von Siolex gestolpert.
Hat einige mehr Funktionen (ob nun nötig oder nicht) und kostet rund die Hälfte vom BG-E6
Leider habe ich noch keinen wirklichen Testbericht oder ähnliches gefunden.
Wie ist die Verarbeitung? Was taugt er wirklich?
Evtl. hat von euch schon jemand Erfahrungen gesammelt.
Ich freue mich über eine Rückmeldung
Der Phoenix |
|
Forenlevel: Fotoreporter
|
Anmeldungsdatum: 27.03.2010 |
Beiträge: 311 |
Wohnort: Woanders |
|
Verfasst am: 22 Okt 2010 16:08 |
|
Ich habe vor ein paar Wochen in einem englischsprachigen Forum mal einen Mini-Review des baugleichen Batteriegriffs von 'Meike' gemacht. Falls es Probleme mit der Sprache geben sollte kann ich am Wochenende (so ich etwas Zeit find) das ganze noch in's Deutsche übersetzen:
TomC hat folgendes geschrieben: |
G'day,
after the discussion over here [Link entfernt] I've ordered a third party battery grip for the 7D and promised to report my findings. This grip is (mostly) offered under the name "LCD vertical timer battery grip for Canon EOS 7D BG-E7". The name/brand that's on the box says "Meike battery grip", with a note that it's for the Canon 7D (so I guess it's available for other brands as well).
I've order mine at Amazon last Thursday, and it arrived today (Monday).
What's in the box:
1. the battery grip itself
2. a compartment for 2 7D batteries, and another one for 6 AA sized batteries.
3: an infrared remote control + one spare battery for the control
4: a (short) manual.
Assembling:
It's pretty straightforward: remove the original battery, detach the original battery compartment cover, put in the grip and turn the attachment screw. Put your batteries into the compartment of your choice (so far I've only used the compartment for the Canon batteries) and close the cover. That's all.
Features:
1: vertical grip with shutter button, M-Fn multi function button, main dial, AF-ON button, AE lock button and AF-Point/Magnify button.
Additionally an on/off switch to disable the complete grip.
2: wireless infrared remote control.
3: timer control.
My findings:
Build quality: build quality is comparable to Canon's original grips (I only own the old BG-ED3 for the Canon D60, but I guess there's not much difference compared to newer grips) and it fits very well. The material is a bit different compared to the camera itself, but the look is still okay.
Handling:
At least for someone like me (coming from a 1D body) the handling is okay. My only critic is that the cavity where your fingers end could be deeper. Not as good as the original grip. Changing batteries is very easy, even when the camera is mounted on the tripod.
Remote control:
It's an infrared remote control, so nothing should be between the control and the camera. Reach is at least 12 meters ( about 40 feet). It's probably even more, but 40 ft is the longest room in my house and it's raining like no tomorrow outside so I can't test longer distances.
It works reliable, the only point for critics is its placement: it's slightly under the lens, so if you use a big lens the lens itself can block the sensor when the control isn't on the (roughly) same level. No biggie, but could be annoying in some situations. Don't forget to put the grip in remote-mode before you start!
Timer control:
The integrated timer control offers the same features as Canons original TC 80N3: pre-delay up to 9 yours, 59 minutes and 59 seconds, exposure time up to 9h, 59 min, 59sec, interval between photos up to 9h, 59 min, 59 sec, and a maximum number of 999 photos.
Even the button for the 10 sec background light is there. Additionally it displays the current time and date.
Additional information: I've tested it with 2 (original) Canon LP-E6 batteries. Both batteries are reported to the camera. The camera's battery info shows the current state (in percent) and the number of photos taken for each battery on one single page. Pretty cool.
My conclusion: when you imagine that Canon's original battery grip BG-E7 costs about 170 Eurobucks, and Canon's original timer remote goes for about 140 Euro, this thingy is a steal. Highly recommended. The only point for critic is the finger cavity, for someone like me with long and slender fingers it could be a bit deeper.
I hope this mini review is useful for someone.
Cheers,
Tom
|
Cheers,
Tom |
_________________ Diverse Kameras, ein paar Objektive, 2 Augen.
|
Forenlevel: Hobbyfotograf
|
Anmeldungsdatum: 17.08.2010 |
Beiträge: 2 |
|
|
Verfasst am: 23 Okt 2010 9:50 |
|
Super,
danke euch beiden.
An sich klingt das, was ich bisher nachgelesen habe nicht schlecht.
Wünsche ein schönes Wochenende
Phoenix |
|
Forenlevel: Fotograf +
|
Anmeldungsdatum: 22.07.2005 |
Beiträge: 1904 |
Wohnort: Bad Mergentheim |
|
Verfasst am: 11 Nov 2010 2:54 |
|
Zwar nicht für die Mark II, aber für die 40D hatte ich mal einen Batteriegriff eines Drittanbieters, Jenis mit Namen. Ich hatte die Variante gewählt, die einen integrierten Timer hatte. Ich war eigentlich zufrieden, verkaufte ihn aber, weil ich auch die 40D verkaufte. Hier ein paar Sätze zu dem Teil:
http://www.traumflieger.de/forum/viewtopic.php?t=22951
Grüße,
Jens |
_________________ Die Signatur ist der Wirtschaftskrise zum Opfer gefallen!
www.kopfgeist-arts.de
|
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen. Du kannst Dateien in diesem Forum nicht posten Du kannst Dateien in diesem Forum herunterladen
|
Alle Zeiten sind GMT + 1 Stunde
Seite 1 von 1
|
|
|
|
|